Water Damage Remediation – What Is It?
It is the process of repairing a home or property to its pre loss condition. Damage to the property could be because of an overflow, flood or other water damage event. The water damage repair procedure includes a number of crucial procedures like loss evaluation, categorization based upon the water contamination levels, decontaminating and drying the structure, monitoring of the process and completion of the procedure. There are two big licensing bodies, specifically the IICRC (Institute of Assessment, Cleansing and Remediation Accreditation) and the RIA (Restoration Market Association) that recommends standards for water damage restoration. The S500 damage due to water guide is the benchmark tool that is utilized by companies that focus on repair of water damage.
Loss Evaluation and Categorization
Loss assessment is the first and the most crucial step in water damage remediation. The evaluation has to be appropriate so that a suitable reaction can be taken. In restorating the damage triggered by water, service technicians and the insurance provider need to collaborate and understand what is damaged and how to set about bring back the damage. Identifying the source of the damage, documents of damage, and accurate quotes are mandatory for a proper water damage repair. Classification is based upon the contamination levels of the water source. The categories are listed below
Category 1 – This is water from clean sources like pipelines, sinks and toilets without faeces or urine.
Category 2 – This is water that has some impurities like water from a dishwashing machine, washing machine or toilet with urine.
Category 3 – This is water that is highly unsanitary and can triggering disease or death if consumed. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are some examples.
Decontamination and Drying
After the examination is complete, the procedure of drying and decontaminating starts at the website. Based on the extent of damage, damage triggered due to water can be classified into 4 types. Class 1 Damage- When loss is restricted to a small location and less water has been soaked up by materials. This leads to sluggish evaporation rate. Class 2 Damage – When the damage is to the whole space and carpet location. Class 3 Damage – When the entire area is saturated with water and Class 4 Damage – when there are numerous deep saturation pockets. Decontamination and drying is a crucial stage in Water damage restoration and devices like blowers, dehumidifiers, scrubbers and subfloor drying equipments need to be used. Decontamination needs to be done if contamination has actually been found in the location. Decontamination might be done for the whole location or in particular pockets where contamination has been found.
Monitoring and Conclusion
Keeping track of the remediation process of damage caused due to damage is critical to achieve the desired results. One needs to be proactive during the tracking process. Examining if the drying equipment is setup effectively, examining if the personnel included are received the job and checking if the devices remain in working order are all part of the tracking procedure. Essential actions are to be taken if anything wrong is spotted during the tracking procedure. The whole process of water damage remediation would be categorized as complete just as soon as the humidity, temperature and the moisture content is as per industry requirements. Upon conclusion of the water damage restoration procedure, the drying devices can be removed.